Fuel hinv

Never published my Fuel hinv. I don't have finished the upgrades/updates but here you are what I have now:
UPDATED 2010-03-02

fuel# hinv -mv
Location: /hw/module/001c01/node
IP34 Board: barcode MSM061 part 030-1707-003 rev -H
Location: /hw/module/001c01/node/cpubus/0
IP34PIMM Board: barcode MSX243 part 030-1836-001 rev -C
Location: /hw/module/001c01/Ibrick/xtalk/13
ASTODYV10 Board: barcode MSX356 part 030-1826-001 rev -B
Location: /hw/module/001c01/Ibrick/xtalk/14
IP34 Board: barcode MSM061 part 030-1707-003 rev -H
Location: /hw/module/001c01/Ibrick/xtalk/15
IP34 Board: barcode MSM061 part 030-1707-003 rev -H
1 600 MHZ IP35 Processor
CPU: MIPS R14000 Processor Chip Revision: 2.4
FPU: MIPS R14010 Floating Point Chip Revision: 2.4
CPU 0 at Module 001c01/Slot 0/Slice A: 600 Mhz MIPS R14000 Processor Chip (enabled)
Processor revision: 2.4. Scache: Size 4 MB Speed 300 Mhz Tap 0xa
Main memory size: 1024 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 4 Mbytes
Memory at Module 001c01/Slot 0: 1024 MB (enabled)
Bank 0 contains 256 MB (Standard) DIMMS (enabled)
Bank 1 contains 256 MB (Standard) DIMMS (enabled)
Bank 2 contains 256 MB (Standard) DIMMS (enabled)
Bank 3 contains 256 MB (Standard) DIMMS (enabled)
Integral SCSI controller 2: Version IEEE1394 SBP2
Integral SCSI controller 0: Version QL12160, low voltage differential
Disk drive: unit 1 on SCSI controller 0 (unit 1)
Disk drive: unit 2 on SCSI controller 0 (unit 2)
Integral SCSI controller 1: Version QL12160, low voltage differential
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: V10
Gigabit Ethernet: tg1, module 001c01, PCI bus 2 slot 1
Integral Fast Ethernet: ef0, version 1, module 001c01, pci 4
Iris Audio Processor: version EMU revision A4, number 2
PCI Adapter ID (vendor 0x14e4, device 0x1645) PCI slot 1
PCI Adapter ID (vendor 0x1077, device 0x1216) PCI slot 1
PCI Adapter ID (vendor 0x1102, device 0x0004) PCI slot 2
PCI Adapter ID (vendor 0x1102, device 0x7003) PCI slot 2
PCI Adapter ID (vendor 0x1102, device 0x4001) PCI slot 2
PCI Adapter ID (vendor 0x104c, device 0x8024) PCI slot 3
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 4
PCI Adapter ID (vendor 0x11c1, device 0x5802) PCI slot 5
HUB in Module 001c01/Slot 0: Revision 2 Speed 200.00 Mhz (enabled)
IP35prom in Module 001c01/Slot n0: Revision 6.210
DMediaPro DM10 FW option: unit 0, revision 1.1.0
USB controller: type OHCI
USB Human Interface Device: device id 0 type tablet